Montana PRIMER 400ml - Aluminium

The Montana PRIMER 400ml - ALUMINIUM T2450 creates a neutral surface on aluminium in preparation for further coating with acrylic, NC (nitro-combi) or synthetic-based lacquers. With built-in properties to resist against flaking and...
The Montana PRIMER 400ml - ALUMINIUM T2450 creates a neutral surface on aluminium in preparation... more
Product information "Montana PRIMER 400ml - Aluminium"

The Montana PRIMER 400ml - ALUMINIUM T2450 creates a neutral surface on aluminium in preparation for further coating with acrylic, NC (nitro-combi) or synthetic-based lacquers. With built-in properties to resist against flaking and cracking on aluminium, the ALUMINIUM PRIMER is light grey in color with a matt finish that will give your aluminium coatings the longest possible lifespan with the highest aesthetic results. Applying ALUMINIUM PRIMER promotes premium adhesion to your artwork, objects or D.I.Y projects for the application of Montana GOLD, Montana BLACK, Montana WHITE, Montana TECH, and EFFECT coatings. With limitations, the ALUMINIUM PRIMER can also offer similar protection on copper and zinc. For best results pre-sand surfaces with fine sandpaper and ensure that your surface is clean, dry and free of all dust and oils before application. Further coating is also possible with the Montana TECH, EFFECT, and Montana Cans color ranges. Smooth, even application is effortless thanks to its medium pressure and Montana FLAT JET CAP Medium, which comes standard on the can. For further application caps, why not try others from the FLAT JET cap range. We suggest trialing on a non-visible area of your material to test for compatibility.

USE: Shake can vigorously for 2-3 minutes before use. Apply ALUMINIUM PRIMER in several thin layers, spraying in sweeping motions. Allow 5 minutes to dry between coats. Coating with colors can take place after 2-4 hours of drying time. Further coats of alternative products might require a drying time of 24 hours or more depending on the coating. Always test spray on a non-visible area to check the compatibility of lacquer or paint. For optimal lifespan, store cans always with the nozzle on.

BROCHURE DOWNLOAD:

TECH & EFFECTS BROCHURE DOWNLOAD pdf.

SAFETY DATA SHEET "Montana PRIMER 400ml - Aluminium"
FAQ
FAQ

When should I use a primer?

The goal of priming is to create a neutral surface of which to apply other coatings onto that will have the longest possible lifespan and the most aesthetic finish as desired.Montana Primers are for the pre-treatment and preparation of surfaces and will offer the greatest adhesion and protection to apply further coatings onto.

How will using Montana ALUMINIUM PRIMER assist me?

Using Montana ALUMINIUM PRIMER will create the best possible surface for adhesion of further coatings on aluminium to help resist and prevent the onset flaking and cracking. Using the ALUMINIUM PRIMER will also make further applied coatings more scratch and dent resistant.

How do I start using my Montana ALUMINIUM PRIMER?

Remove the spray nozzle and turn the can upside down. Strike with your palm allowing safety ring to fall out. Shake vigorously for 2-3 minutes ensuring you can hear the mixing balls moving freely. Replace the cap back onto the top of the can valve and trigger away from substrate to test. If flowing freely you can start painting.

Which coatings can apply over the ALUMINIUM PRIMER?

You can apply any Montana-Cans color, tech or effect spray over the ALUMINIUM PRIMER once it has dried.

How long does Montana Montana ALUMINIUM PRIMER spray take to dry?

Complete drying time is usually 2-4 hours however re-caoting can occur after 5 minutes.

Can I use other coatings on it other then sprays?

Yes. It is possible to use other coatings over ALUMINIUM PRIMER spray once it is dry. We suggest always test on a non-visible are of the work for compatibility.