MONTANA SPRAY PAINT
MONTANA TECH SPRAYS
MONTANA EFFECT SPRAYS
ACRYLIC Marker & Ink
Montana PRIMER enables excellent adhesion and further coating of synthetic, nitro-combination or acrylic spray paints. Montana offers different primers for application on different surfaces that need to be pre-treated such as plastic, metal and styrofoam. The Universal Primer also works on leather, cardboards, wood and many other materials. After the Primers have been applied you can work with Montana spray paints on the pre-treated ground. Use primers for efficient and more permanent results. Easy to apply, sand and re-coat. For indoor and outdoor applications (wearing a respirator mask is recommended). Cans which are not empty should be disposed of as “special refuse”.
USE: Apply primer in several thin layers spraying before the previous coat is fully dry, but with 1 or 2 minutes between each pass. Further coats might require a drying time of 24 hours or more depending on substrate. Always test spray on a non-visible area to check compatibility of lacquer or paint.
When should I use a primer?
The goal of priming is to create a neutral surface of which to apply other coatings onto that will have the longest possible lifespan and the most aesthetic finish as desired.Montana Primers are for the pre-treatment and preperation of surfaces and will offer the greatest adhesion and protection to apply further coatings onto.
When do I use Montana UNIVERSAL PRIMER?
Montana UNIVERSAL PRIMER is an all-round surface preparer that can be used on concrete, brick, terracotta, ceramic, leather, cardboard, wood and many other materials. The UNIVERSAL PRIMER is ideal for those short of space that just want one multi-purpose primer for their projects. We suggest trialing on a non-visible area of your material to test for compatibility
How do I start using my Montana UNIVERSAL PRIMER?
Remove the spray nozzle and turn the can upside down. Strike with your palm allowing safety ring to fall out. Shake vigerously for 2-3 minutes ensuring you can hear the mixing balls moving freely. Replace the cap back onto the top of the can valve and trigger away from substrate to test. If flowing freely you can start painting.
Which coatings can apply over the UNIVERSAL PRIMER?
You can apply any Montana-Cans color, tech or effect spray over the UNIVERSAL PRIMER once it has dried. It will increase adhession, help seal your substrate, create a more even surface and increase the longevity of the coatings applied over it.
Can I sand it to my desired surface finish?
Yes. You can sand Montana UNIVERSAL PRIMER once dry. Depening on the grade of the sand paper, smooth or rough surfaces can be achieved.
How long does Montana Montana UNIVERSAL PRIMER spray take to dry?
Drying time is usually 15-20 minutes but can vary depending on substrate, ambient temperature, humidity levels and thickness of coats applied.
Can I use other coutings on it other then sprays?
Yes. It is possible to use other coatings over UNIVERSAL PRIMER spray once it is dry. We suggest always test on a non-visible are of the work for compatibility.
The following PRIMERS are also available (click for more info!):