Der Montana METAL PRIMER ist das perfekte Werkzeug für die Grundierung von Metalloberflächen. Mit Antioxidationseigenschaften, die helfen, dem Auftreten von Rost entgegenzuwirken. Nicht geeignet für Aluminium oder Stainless Steel. Für Almuminium bitte den ALU PRIMER verwenden.

Der METAL PRIMER hat eine matte Oberfläche und schafft die bestmögliche Haftung und den bestmöglichen Schutz für weitere Beschichtungen mit der Montana GOLD, Montana BLACK oder Montana WHITE Farben. Der METAL PRIMER bietet zudem einen zusätzlichen Schutz vor Kratzern und Beulen.

BROCHURE DOWNLOAD:

TECH & EFFECTS BROCHURE DOWNLOAD pdf.

When should I use a primer?

The goal of priming is to create a neutral surface of which to apply other coatings onto that will have the longest possible lifespan and the most aesthetic finish as desired. Montana Primers are for the pre-treatment and preparation of surfaces and will offer the greatest adhesion and protection to apply further coatings onto.

When do I use Montana PRIMER's?

Montana PRIMER’s are all-round surface preparers that can be used on plastics, metal, styrofoam, leather, cardboard, wood and many other materials. We suggest trialing on a non visible area of your material to test for compatibility

Which Montana PRIMER do I use when?

There are four different Montana PRIMER’s that can be used for different surfaces as listed below:

Montana PLASTIC PRIMER T2000:

To be used on some plastics and acrylic based surfaces. Clear colored spray. Montana PLASTIC PRIMER is a surface preparer that can be used on the following hard plastics: polyurethane (PUR), polystyrene (PS), polyamide (PA), polypropylene rubber, modified (EPDM), acrylic butadiene styrene plastics (ABS),
 glass-fibre reinforced plastics (GfK), hard polyvinyl chloride (Hard-PVC). Always trial on non-visible area of your material to check for compatibility!

Montana POLYSTYRENE PRIMER T2200:

To be used on most polystyrene and styrofoam surfaces. Cream colored spray. Always trial on non-visible area of your material to check for compatibility!

Montana UNIVERSAL PRIMER T2300:

To be used on concrete, brick, terra-cotta, ceramic, leather, cardboard, wood and many other materials. White colored spray.

Montana METAL PRIMER T2400:

To be used on metal (iron or brass) or mineral surfaces. Dark-brown colored spray. Please note the Metal Primer is NOT suitable for priming aluminum and stainless steel.

How do I start using my Montana PRIMER?

Remove the spray nozzle and turn the can upside down. Strike with your palm allowing safety ring to fall out. Shake vigorously for 2-3 minutes ensuring you can hear the mixing balls moving freely. Replace the cap back onto the top of the can valve and trigger away from substrate to test. If flowing freely you can start painting.

Which coatings can apply over Montana PRIMER’s?

You can apply any Montana-Cans color, tech or effect spray over Montana PRIMER’s once they are dried and cured. They will increase adhesion, help seal your substrates, create a more even surface and increase the longevity of the coatings applied over it.

Can I sand it to my desired surface finish?

Yes. You can sand Montana PRIMER’s once they are dry. Depending on the grade of the sand paper, smooth or rough surfaces can be achieved.

How long do Montana Montana PRIMER’s take to dry?

Drying times vary due to the PRIMER and the context it is being used. They usually require 15-20 minutes to be dust dry. Curing time can vary depending on substrate, ambient temperature, humidity levels and thickness of coats applied.

Can I use other coatings on Montana PRIMER’s other then sprays?

Yes. It is possible to use other coatings over Montana PRIMER’s spray once they are cured. We suggest always test on a non-visible are of the work for compatibility.

Montana METAL PRIMER

When should I use a primer?

The goal of priming is to create a neutral surface of which to apply other coatings onto that will have the longest possible lifespan and the most aesthetic finish as desired.Montana Primers are for the pre-treatment and preparation of surfaces and will offer the greatest adhesion and protection to apply further coatings onto.

How will using Montana METAL PRIMER assist me?

Using Montana METAL PRIMER will create the best possible surface for adhesion of further coatings and offers anti-oxidisation properties to help to resist and prevent the onset of rust. Using the METAL PRIMER will also make further applied coatings more scratch and dent resistant.

When do I use Montana METAL PRIMER?

Montana METAL PRIMER is specifically created for the pre-treatment of metal (iron or brass) or mineral surfaces before applying further coatings.  It is very important that the surfaces are clean, dry and free of all dust and oils before application. We suggest trialing on a non-visible area of your material to test for compatibility. Please note the Metal Primer unsuitable for priming aluminum.

How do I start using my Montana METAL PRIMER?

Remove the spray nozzle and turn the can upside down. Strike with your palm allowing safety ring to fall out. Shake vigorously for 2-3 minutes ensuring you can hear the mixing balls moving freely. Replace the cap back onto the top of the can valve and trigger away from substrate to test. If flowing freely you can start painting.

Which coatings can apply over the METAL PRIMER?

You can apply any Montana-Cans color, tech or effect spray over the METAL PRIMER once it has dried.

How long does Montana Montana METAL PRIMER spray take to dry?

Complete drying time is usually 24hours however re-coating can occur after apx. 60 minutes.

Can I use other coatings on it other then sprays?

Yes. It is possible to use other coatings over METAL PRIMER spray once it is dry. We suggest always test on a non-visible are of the work for compatibility.